PROPOSAL NO. 15159-CP
We have available for immediate sale the following Polypropylene Staple Fiber Lines; subject to prior sale:
PROPOSAL NO. 15159-PP
1 Polypropylene Resin Blending
Mixing and storage supply system
Comprising of
1 K-Tron Blending and Mixing unit
With 4 component feeders
1 Stainless Steel Supply feed with side additive tank
2 Stainless steel Silos
4 Stainless Steel storage / feed tanks
Price: F.O.T.
2 Polypropylene Staple Fiber Spinning Lines
Two Stage Process
Year of Manufacture 1990-1993
First Stage – Melt Spinning Process
4 Extrusion Lines Each consisting of
(1) Davis Standard Screw Extruders
150mm screw diameter
Model 60IN60HDSPW-29
400 HP motor 1750rpm
Each With onboard ship hoppers
(2) Spinbeams with 8 positions each
Total 16 thread lines
4 DPF to 6 DPF Denier Range
735 Holes in each Spin Pack
(1) Spin Pack Heater
(2) Draw / Quench Beams
Each with 8 positions & 2 Draw Rollers
With 1 feed roller per position
Panel Mate controls
(2) Draw and Gear Tooth Final Drawing
Each consisting of
4 Draw rollers and
2 Gear tooth pull rollers and crimping box
Exit to
Stainless Steel Tow Cans
40 inch diameter x 54 inch height
Price: F.O.T.
1 Roller Conveyor & Storage System for
Approx. 400 cans 40 inch diameter
Price: F.O.T.
Second Stage – Spinning Process
2 Staple Fiber Spinning Lines
Each consisting of
(4) Roller Conveyor Creels
Each accommodating up to 12 Tow Cans
40 inch diameter c 54 inch height
(1) Two Roll Drawing unit
24 inch Stainless Rolls x 16 inch diameter
(3) 4 over 3 Draw Roll Units
24 inch Stainless Rolls x 16 inch diameter
(1) Two Roll Drawing unit
24 inch Stainless Rolls x 16 inch diameter
(1) Three Roller lubrication / oiling trough
(1) Tow Accumulator & Tensioning Stand
(1) Lummus Rotary Cutter
16 inch diameter cutter
2 inch fiber length
Exit to Fiber Bin
Price: F.O.T.
We have available the following Elitex OE Spinning Frames; subject to prior sale:
PROPOSAL NO. 15159-OE
6 Elitex Open End Spinning Frames
Model BD-10N
160 Rotors
65mm Rotor Diameter
Tube Take up
Running Ne3
With Auto Doffer
Year 1990
4 Elitex Open End Spinning Frames
Model BD-10N
144 Rotors
65mm Rotor Diameter
Running Ne3
With Auto Doffer
Year 1990
Available: Immediately
Price: F.O.T.
We have available the following Cornered Cans; subject to prior sale:
PROPOSAL NO. 15159-cans
3,000 +/- Steel Cornered Spinning Cans
Suitable for Investa / Elitex OE Spinning Frames
7 inches Width
32 inches Depth
32 inches High
Year: 1990
Available: Immediately
Price: F.O.T.
We have available the following Fiber Blending Bin System; subject to prior sale:
PROPOSAL NO. 15159-BLEND
6 Hergeth Hollingsworth Blending Bin Systems
Model KFR
Year 1980
With automatic Bin Emptying and
Piping and Stock Control Valves
Each Independently constructed of Galvanized Steel walls
Dimensions
26 Meters Long
15 Meters Height
10 Meters wide
Price: F.O.T.
3 Hergeth Hollingsworth Blend Master Bins
each with stock fan feed
Roller Bottom Conveyor
Spiked Lattice Feed to Exit Fan
Dimension
3 Meter wide
16 Meter Long
10 Meter Height
Price: F.O.T.
We have available the following Truetzschler Equipment; subject to prior sale:
PROPOSAL NO. 15159-TRUTZ
1 Truetzschler Waste Feeder
Model AS.1000
1000mm wide
4 meter feed apron
Year: 1990
Price: F.O.T
1 Truetzschler Fine Opener
Model TO-U- 1600
1600mm working width
With Feed Reserve
Model FD-U 1600
With Condenser
Model LVSA
With Hump Magnet
And Transport Fan
Year: 2014
Price: F.O.T
1 Truetzschler Card
Model TC11
With Chute Feed
Automatic Can Changer
IDF.2 Coiler with Autoleveler
Can size 20 inch diameter x 48 inch
Year: 2014
Price: F.O.T
1 Leesona Precision Winder
Model 864
6 positions
Tube Take up
2 inch traverse
Price: F.O.T.
We have available the following Needlepunch Lines; subject to prior sale:
PROPOSAL 15159-NP
1 James Hunter Needlepunch Line
C&K Manual Feed Hopper/36"/Incline spiked lattice
C&K Air Box / Reserve/72"
Wise Shaker chute Model SCC-3x72 Year 1993
Hunter Garnett Model 35 SD 20-30 x 72”wide
Hunter Tandem Feed Model GF-720
Hunter Garnett Feed Model GFT-720
Hunter 4 ft. incline apron (80-140 ft./min)
Hunter Model 11A Cross lapper 84” x 168”
Hunter Needleloom
Year: 1953
Model 54F/L
Working Width 3.9 meter
Double Board Downstroke 2 rows 4 boards
660 rpm 30 ft./min. throughput
7036 needles per board X 4 (180 needles /lin. inch)
2 roll accumulator with a 10’ travel / 40' capacity
Fife Guide Sensor
Edge guided unwind and 156” wide surface winder with press roll.
Weights of Fabric PP with Min of 6 oz/sq. yd. and Max of 50 oz/sq. yd.
40 HP DC drive single phase
Status: Still installed on the mill floor
Available: Immediately
Price: ex-mill floor USD
1 Asselin Needlepunch Line
Hunter 3 Hopper Weigh Pan Blend line /36"
Type Fiber meter Model FC360
Fiber conveyor
Fiber Controls Opener type D-5137
Fiber Controls Condensor
Hump Magnet / Fans
2 Bag Dust Collector
Wise Air Box / Condensor / Reserve / 72"
Wise shaker chute /72"
Wise Picker Model HWO-36
Wise Garnett Webformer 84” wide (model 35-A)
Asselin Crosslapper type 350 completely rebuilt 2014
Crosslapper 95" in and 192" out
Metal Detector
Asselin Needlepunch
Model 900S series 5900 Year 1979
Working Width 4.8 meter
Double Board Downstroke
800 rpm / 40 ft/min line through put
75hp 460VAC (AC inverter drive) 1800 rpm
200” surface driven unwind/winder with press roll
Fife center guide unit with 6 roll accumulator
with 10’ travel/70'capacity
180” wide shaft unwind behind cross lapper for
sandwich layer process.
Weights of Fabric PP with Min of 6 oz/sq yd and Max of
50 oz/sq yd.
Status: Still Installed on the Mill Floor
Available: Immediately
Price: ex-mill floor USD
We have available the following PP Beaming and Weaving Machinery; subject to prior sale:
PROPOSAL NO. 15159-WEAVE
3 Leesona Polypropylene Beamers
185 inch Working width
40 Inch Flange Diameter
Without Creels
14 Sulzer Projectile Looms
Model PU
172 inches working width
Single Color
10 Shaft Cam Motion
6 levers installed
Equipped with Doup Leno Harness frames
Electronic Let off
Off Loom Take up
Year 1980
8 Sulzer Projectile looms
Model TW11
172 inches working width
153 inches working width
Cannibalized
Price: ex-mill floor
Your consideration and prompt response will be most appreciated.
