Complete Barmag Barrier Film Production Line Year 1990 (upgraded 2010)
We have available the following BARRIER FILM PRODUCTION LINE; subject to prior sale:
PROPOSAL 6127-EXT
COMPLETE BARMAG BARRIER FILM EXTRUSION LINE – BLOWN FILM
Type BF 12/4.5-800 AK
Year 1990 (upgraded 2010)
5 Layers
Film Structure ABCBD
Materials: LDPE, LLDPE, mLLDPE, PP, PA, EVOH
Film width 800 mm
Extruder 1 Layer ref: A – Screw dia. 45 mm
Extruder 2 Layer ref: B – Screw dia. 45 mm
Extruder 3 Layer ref: C – Screw dia. 45 mm
Extruder 4 Layer ref: D – Screw dia. 45 mm
Rotating Head with 1,2 mm gap
Die dia. 300 mm
with Corona Treatment
Rewinder Type: double
Winding options: sleeve, half sleeve and web
Capacity 100 kg/h
1 GN (CANADA) BAG MAKING MACHINE – STANDARD POUCHES
Type GN 46P
Year 1990
Single shaft unwind 1150 mm
Above Unit can be rotated at 90 degrees to the machine
Spring loaded compensator assembly with adjustable “S” wrap for
Air trap to re-inflate tube
Rear on/off station
1 Spreader Roller assembly
3 Roll cluster with clamps
2 cross sealers controlled by timer
Rear cross sealer to have side slitter
2 cooling station with marathon air style cylinder
1 electric eye assembly
Guillotine with lubricator
Machine to be equipped with 4 Eurotherm heat controllers
for heater loads,Centre section with centre slitter and draw rollers
The front draw rollers and the rear spreader rollers will be driven by
a servo drive, the length setting is made through thumbwheel setting on
operator panel. Jog indexer gate with 2 fixed casters at the front and 2
swivel casters at rear.
1 TOTANI (JAPAN) BAG MAKING MACHINE – AUTOMATIC POUCHES
Type BH-60 D (Three-Side-Seal-Series)
Year 2007
Bag Making Sizes & Shapes:
A) Bottom Seal (4-Line bottom seal)
Bag length L1: 2-strikes 300 mm max, 1- strike 500 mm max.
Bag width W1: 75 mm – 600 mm
Seal width S1: 80 mm max.
Seal width S2: 25 mm max.
B) Side Seal (4- row side seal case)
Bag length L2: 50 mm- 600 mm
Bag width W2: 2-strikes 300 mm max, 1- strike 500 mm max.
Seal width S3: 25 mm max.
Seal width S4: 40 mm max.
Standart Specifications:
Film: Laminated Film of all kinds, max. width 1200 mm
Roll size: max. dia. 800 mm
Roll film unwinding unit: Horizontal shaft, V plate system
Definitive tension control system, powder, brake equipment
Numerical control system
Film feed mechanism: Dual AC servo motor drive system
Heat Sealer vertical movement: Single AC servo motor drive system
Sealing width: Cross Seal 80 mm max. Longitudinal 50 mm max.
Bag making data storage function: Sealing Temp.,Bag Making Speed,
Sealing Time, Sealing Ratio, Film Acceleration
Maximum number of shots: 240 CPM
Bag making data storage function: Max. Film Speed, 45 m/min for
Film roll dia. 800 mm to 600 mm, 60 m/min for smaller dia.
Dimensions: 1,82 m x 7,83 m
Weigth: 4900 kg
Power Capacity: 35 kW
Compressed Air: 6 kgf/cm² ( 0,6 Mpa)
Cooling Water: 15 Liter/min.
1 OFFICINA MECCANICA (ITALY) SLITTER
Type AZ2 UT 1050
Year 1990 (upgraded in 2010)
Power Capacity: 40 kW
Max. Speed: 500 m/min.
Maximal roll weight (unrolling device) – no limit
Maximum width (unrolling device) - 1100 mm
Maximum roll dia. (unrolling device) – 1000 mm
Roller width (winding device) – 110-500 mm
Maximum roll dia. (winding device) – 600 mm
Maximum Rolls (winding device) – 7
Compressed Air: 6 bar
1 MAGRUS SLITTER
Year 2010
Power Capacity: 30 kW
Max. Speed: 200 m/min.
Maximal roll width: 800 mm
Maximum weigth: 35 kg
Maximum roll dia.: 500 mm
Maximum Rolls– 3
Compressed Air: 6 bar
Location: Europe
Available: Immediately
Price: ex-mill floor
Your consideration and prompt response will be most appreciated.