zurück zur Übersicht

Complete Lines | 6393-COA

1 x CEDAL ADARA COATING & DRYING RANGE , YEAR 2005


PROPOSAL NO. 6393-COA

We have available the following CEDAL ADARA COATING & DRYING RANGE, subject to prior sale:

PROPOSAL – 6393-COA

    1    CEDAL (ITALY) COATING & DRYING RANGE
        Model Multitreater
        Type ADARA
        Year 2005
        Working Width 1.320 mm
        Roller width 1600 mm
        Speed 1- 20 m /min.
        with Infrared Dryer
        used for Impregnation, Cleaning, Coating & Drying of glass weaved fabrics
        with epoxy resin – End product PRE-PREG* (used in aviation)
        Overall     Length:     13.250 mm
                Width:     6.110 mm
                Height:     10.717 mm
                Weight:     35 t

* Pre-preg is a composite material made from "pre-impregnated" fibers and
a partially cured polymer matrix, such as epoxy or phenolic resin, or even thermoplastic mixed with liquid rubbers or resins.
The fibers often take the form of a weave and the matrix is used to bond them together and to other components during manufacture. The thermoset matrix is only partially cured to allow easy handling;
this B-Stage material requires cold storage to prevent complete curing. B-Stage pre-preg is always stored in cooled areas since heat accelerates complete polymerization. Hence, composite structures built of pre-pregs will mostly require an oven or autoclave to cure. The main idea behind a pre-preg material is the use of anisotropic mechanical properties along the fibers, while the polymer matrix provides filling properties, keeping the fibers in a single system.
Pre-preg allows one to impregnate the fibers on a flat workable surface, or rather in an industrial process, and then later form the impregnated fibers to a shape which could prove to be problematic for the hot injection process. Pre-preg also allows one to impregnate a bulk amount of fiber and then store it in a cooled area (below 20°C) for an extended period of time to cure later. The process can also be time consuming in comparison to the hot injection process and the added value for pre-preg preparation is at the stage of the material supplier.

        Location:    Europe
        Available:    Immediately
        PRICE:         To be negotiated

Your consideration and prompt response will be most appreciated.