zurück zur Übersicht

NON-Textile | 6263-IM

1 x NISSEI (JAPAN) INJECTION MOLDING MACHINE YEAR 1998


PROPOSAL NO. 6263-IM

We have available for sale the following machinery, subject to prior sale:

PROPOSAL NO. 6263-IM

    1    NISSEI (JAPAN) INJECTION MOLDING MACHINE
        (Biaxial Orientation Stretch-Blow Molding)
        Type ASB-250H
        Year 1998
        Injection Unit:
        Weight per Shot 8 ounces
        Screw Dia. 54 mm (2.126”)
        Volume per Shot 275 cm³ (16.79 cu.in)
        Injection Pressure -Max 1389 kg/cm² (19829 psig)
        Injection Rate 140 cm³/sec (8.55 cu.in/sec)
        Screw Stroke 120 mm (4.72”)
        Screw Speed 0-164 rpm
        Injection Station:
        Clamp Force upper 14.3t (15.7t)
        Clamp Force lower 18.6t (20.5t)
        Clamp Stroke upper 300 mm (11.8”)
        Clamp Stroke lower 250 mm (9.8”)
        Die Plate Size upper mold 70 x 440 mm (2.76“ x 17.32“)
        Die Plate Size lower mold 140 x 560 mm (5.51“ x 22.04“)
        Heating Station:
        Heating Core Rod Stroke 300 mm (11.8”)
        Heating Pot Stroke 240 mm (9.45”)
        Stretch and Blow Molding Station:
        Stretch Stroke 200 mm (7.87”)
        Blow Core Stroke 300 mm (11.8”)
        Blow Mold Clamping Force 10.8t (11.85t)
        Bottom Mold Clamping Force 2.75t (3 t)
        Bottom Mold Stroke 40 mm (1.57”)
        Bottle Eject Station:
        Ejector Stroke 140 mm (5.5”)
        Electrical Systems:
        500V / 50 Hz
        Motor Size & Amperes 37/6/63
        Total Rated Horsepower     50 HP
        Total Heating Capacity 20.1 kW
        Hydraulic Systems:
        Oil Reservoir Capacity 750l (198 gallons)
        max. Pump Capacity 293l/min. (77.4 GPM) at 7Kg/cm² (100 psig)
        max. System Pressure 140 kg/cm² (2.000 psig)
        Heat Exchanger Water Requirements 95l/min (25 GPM) at 25 deg C
        Pneumatic System Requirements:
        Machine Operating Pressure 9kg/cm³ (130 psig)
        Processing Air Pressure 14-17.5 kg/cm³ (200-250 psig)
        Total Volume Required 1100l/min. (40 SCFM) @ 14 kg/cm³
        Mold Chilling Requirements:
        Cooling Capacity (Air Cooled Chiller) 45360 kcal (180.000 BTU)
        min. Operating Pressure 3 kg/cm³ (43 psig)
        Water Capacity (Air cooled Chiller) 130 L/min (34 GPM) @ 10 deg C
        Machine Dimensions :
        Length 5230 mm (205.9”)
        Width 1510 mm (59.45”)
        Total Ceiling Height without Hopper 2445 mm (96.26”)
        Total Installation Floor Area 7.89 m² (84.93 sq.ft)
        Hopper Mounting Height from Floor 1310 mm (51.57”)
        Bottle Discharge Height from Floor 345 mm (13.58”)

        Location:    Europe
        Available:    Immediately
        PRICE:        TO BE NEGOTIATED


Your consideration and prompt response will be most appreciated.